01
Substrate review
Match media and pressure to the base material, cast condition and desired profile.
Media matched to substrate
Sand Blasting Services
Controlled abrasive blasting for cleaning, matte texture and coating preparation on metal parts and assemblies. JINGLE reviews substrate, media, masking and target surface condition before processing.
- Surface Cleaning & Texture
- Pre-Treatment for Coating
- Controlled Media and Coverage
Trusted by Customers Across Industries
Surface preparation for industrial equipment, sheet metal, castings, automation and custom OEM programs.
Sand Blasting Capabilities
A quick view of the information buyers need before sending a sand blasting RFQ. Final values are confirmed against substrate, media, coverage, texture and downstream coating requirements.
| Parameter | Capability details |
|---|---|
| Blasting Process | Abrasive blasting for cleaning, deburring, matte texture or coating preparation |
| Part Envelope | To be confirmed - reserve booth, rack and handling envelope |
| Media / Texture | To be confirmed - media type and target profile by substrate and finish |
| Surface Condition | As-blasted, coating-ready or project-specific condition |
| Materials | Steel, stainless steel, aluminum, castings and compatible fabricated parts |
| Masking | Threads, bores, sealing faces and cosmetic zones masked per drawing |
| Production Volume | Prototype, low-volume and batch production |
| Accepted Drawing Formats | STEP, IGES, Parasolid, SolidWorks, PDF drawing and DXF |
Clean the Surface. Set the Texture. Prepare the Next Finish.
02
Coverage and masking
Reach recesses while protecting bores, seals, threads and critical faces.
Coverage and masking planned
03
Surface-ready release
Check cleanliness, texture and handling condition before coating or assembly.
Coating-ready surface checked
See the Work Behind the Capability
Real blasting equipment
Blast cabinets, booths, media systems and protected handling areas.
Actual surface preparation in process
Enclosures, castings and machined parts undergoing abrasive preparation.
Real texture and cleanliness inspection
Prepared parts staged for surface profile and cleanliness inspection.
Parts We Commonly Blast
Fabricated Enclosures
Sheet metal housings prepared for coating or a specified matte texture.
Welded Frames
Joined structures with weld areas and coverage requirements reviewed.
Cast Housings
Cast surfaces cleaned to the agreed downstream finish condition.
Machined Components
Precision parts with sealing and mating features protected.
Brackets and Panels
Panels and supports prepared with controlled surface texture.
Custom OEM Assemblies
Custom assemblies with media access and post-blast handling planned.
Materials We Blast
Mild Steel
coating-ready structures
Stainless Steel
corrosion-resistant panels
Aluminum
lightweight housings
Iron Castings
cast component cleanup
Fabricated Assemblies
welded OEM assemblies
Quality Evidence at Every Handoff
- 01
Incoming Substrate and Surface Review
Review base material, cast or welded condition and existing surface contamination.
- 02
Media and Masking Checks
Confirm approved media, protected features and process setup.
- 03
Coverage, Cleanliness and Texture Inspection
Inspect coverage and texture against the agreed surface reference or profile requirement.
- 04
Final Coating-Ready Inspection
Verify cleanliness and handling condition before the next coating or assembly step.
Documents available
- FAI
- Material Certificate
- Surface Profile Record
- Cleaning Record
- CoC
- PPAP Upon Request
Prototype to Production
01
Prototype Preparation
Confirm media, texture, masking and downstream coating response on first articles.
02
Low-Volume Production
Support launch quantities with approved surface samples and controlled coverage.
03
Batch Production
Repeat the media, masking and cleaning route with planned checks.
Engineering Support You Can Use
01
Surface Preparation Review Before Processing
Review starting condition and downstream coating requirements before blasting.
02
Media, Masking and Profile Planning
Match abrasive media and masking to substrate and target surface profile.
03
Flexible Prototype & Batch Production
Use approved first-article texture to guide launch quantities and repeat work.
04
Controlled Coverage, Texture and Cleanliness Inspection
Check coverage, residual contamination and profile against agreed criteria.
05
Material & Finish Documentation
Confirm surface profile, cleaning and material records with the RFQ.
06
Responsive RFQ Support
Clarify substrate, texture, masking and quantity before selecting the preparation route.
Sand Blasting FAQ
What materials and part types can you sand blast?
Steel, stainless steel, aluminum, iron castings and compatible fabricated assemblies can be reviewed. Substrate condition, wall thickness and sensitive features determine the suitable media and process approach.
Can you create a matte texture or coating-ready surface?
Matte texture and coating-ready surfaces can be evaluated against an approved sample or profile specification. Include the downstream coating requirements so cleanliness and texture are planned together.
How do you protect threads, bores and sealing faces?
Threads, bores, sealing faces and critical cosmetic areas are reviewed for suitable masking. Mark protected surfaces and final tolerances on the drawing before the blasting route is confirmed.
What blasting media and surface profiles can you support?
Abrasive media and target profile are selected after reviewing the substrate, starting condition and desired finish. Share any media restrictions and contamination limits, especially for stainless or aluminum components.
Can you provide surface profile and cleaning records?
Surface profile and cleaning records can be included when inspection methods and acceptance criteria are agreed. Specify required records and downstream coating standards with the RFQ.
What information is needed to quote sand blasting?
Send the drawing with substrate, target texture, media preference, masking, quantity and downstream coating requirements. Include sensitive features and any handling or cleanliness restrictions.
Have a Part to Prepare or Texture?
Send the drawing with substrate, target texture, masking, quantity and downstream finish. We will review the blasting route before quoting.
- 3D Model
- Technical Drawing
- Substrate
- Target Texture
- Masking Requirements
- Quantity
- Inspection Requirements
Related surface finishing processes