Swiss Machining Services

Small, precise turned components with close workpiece support and repeatable process control. JINGLE helps move Swiss-type parts from prototype review into stable production.

Sliding-Headstock Machining
Small-Diameter & Long-Slender Parts
Repeatable Dimensional Control

Trusted by Customers Across Industries

Small precision components for automation, instrumentation, medical equipment, mobility and industrial OEM programs.

Swiss Machining Capabilities

A quick view of the range, feature types and inspection checkpoints to discuss in an RFQ.

Parameter	Website copy
Machining Type	Swiss-type sliding-headstock turning; available configuration confirmed per project
Typical Diameter Range	To be confirmed - reserve bar and tooling range
Typical Tolerance	To be confirmed - quote-specific tolerance range
Surface Finish	To be confirmed - Ra range by material and process
Materials	Stainless steel, aluminum, brass, alloy steel, carbon steel and engineering plastics
Inspection	In-process gauging, thread checks, CMM and final inspection
Production Volume	Prototype, low-volume and batch production
Accepted Drawing Formats	STEP, IGES, Parasolid, SolidWorks, PDF drawing and DXF

Support Close to the Cut. Control Close to the Feature.

Guide-bushing support

Keep small or slender stock supported close to the cutting zone.

Deflection managed near the tool

Detailed features

Machine small diameters, grooves, threads and cross features with a focused process plan.

Dense features coordinated

Repeatable output

Carry approved tooling and gauging logic into the next production batch.

Stable repeat production

See the Work Behind the Capability

Real Swiss-type equipment

Sliding-headstock machine and bar-feed area prepared for production.

Actual small-part machining

Close workholding and a small precision component at the cutting zone.

Real production environment

Organized tooling, part flow and measured finished components.

Parts We Commonly Machine

Micro Shafts

Small rotational shafts with controlled diameters and shoulders.

Pins & Standoffs

Slender locating and spacing components for precision assemblies.

Small Bushings

Compact bearing and spacing interfaces with controlled bores.

Threaded Fittings

Small fluid and equipment connections with verified threads.

Sensor & Connector Parts

Detailed electrical, sensing and fluid-interface components.

Precision Instrument Components

Small feature-dense parts for measurement and control equipment.

Materials We Machine

Stainless Steel
Corrosion-resistant parts
Aluminum
Lightweight components
Brass & Copper
Electrical and fluid fittings
Alloy & Carbon Steel
Wear-resistant shafts
Engineering Plastics
Low-friction bushings

Quality Evidence at Every Handoff

01
Incoming Material Inspection
Verify bar material grade, condition and certification before machining.
02
In-Process Diameter & Thread Checks
Gauge small diameters and threads before the next cycle stage.
03
CMM Inspection
Measure specified feature relationships and provide traceable results when requested.
04
Final Inspection
Confirm dimensional, visual and documentation requirements before release.

Documents available

CMM Report
FAI
Material Certificate
CoC
PPAP Upon Request

High-key optical comparator or vision inspection with small parts in a clean tray.

Prototype to Production

Prototype

Confirm the small-part design, tool access and critical fits.

Low-Volume Production

Support launch quantities with documented gauging.

Batch Production

Repeat the approved setup for stable replenishment.

Engineering Support You Can Use

Engineering Review Before Production

Confirm slenderness, stock condition, feature access and inspection needs before release.

Small-Diameter Part Expertise

Plan support and tooling around small, slender and feature-dense geometry.

Flexible Prototype & Batch Production

Carry essential setup and gauging controls from prototypes into repeat batches.

Controlled Gauging Process

Match gauges and inspection checkpoints to small functional features.

Material & Inspection Documentation

Receive the certificates and reports specified in the RFQ.

Responsive RFQ Support

Get a clear response path for size, material, volume and tolerance questions.

Swiss Machining FAQ

What part sizes are best suited to Swiss machining?

Swiss machining is strongest for small-diameter or slender bar-fed parts. Send the drawing so we can confirm the exact practical range.

Can you machine long-slender or small-diameter parts?

Yes, when bar condition, guide-bushing support and the length-to-diameter ratio suit the process. Send the drawing for confirmation.

Can you machine threads and cross-drilled features?

Yes, when machine configuration, tool access and the feature dimensions support the required process.

What materials can you machine?

We review stainless steel, aluminum, brass and copper, alloy and carbon steel, and engineering plastics.

Do you accept prototype and low-volume orders?

Yes. We support prototypes and low-volume work as well as repeat production, subject to setup and project review.

Can you provide inspection reports for small precision parts?

Yes. Request the required CMM report, FAI, material certificate, CoC or PPAP documentation in the RFQ.

Have a Small Precision Part to Machine?

Send the model or drawing with diameter, length, material, quantity and critical feature requirements. We will review the best Swiss machining path.

3D Model
Technical Drawing
Material
Quantity
Diameter & Length
Tolerance
Inspection Requirements

Related machining processes